Neat Bar Pad Bundle- Collaboration Bar designed for Zoom

Packs a punch.

Neat Bar is a simple and elegant, compactly designed yet highly capable meeting room device. It's perfect for bringing superior-quality audio and video to your meeting, huddle or focus rooms for up to ten people. You can mount Neat Bar above or below one or two monitors, and it comes with Neat Pad, our dynamic touch screen, which you can configure as a controller or scheduler.

Neat Bar is our compact and highly capable meeting device designed and engineered for Zoom.

• Camera LED
• System LED
• Accelerometer
• Ambient light sensor
• Sensors for temperature, humidity, CO2 and VOC
• Table stand, wall mount and screen mount
• Dual screen support
• Kensington lock
• Zoom Rooms software

Audio

• Speakerbox for maximal tonal range with minimal distortion
• Opposing drivers for vibration cancellation
• Dedicated wide-angle ultrasonic tweeter
• 3 sensor mics
• 5 microphones angled in an end-fire array
• Hardware accelerated audio processing
• Beamforming
• Echo cancellation
• Noise suppression
• Automatic gain control
• Dereverberation

Video

• 4x digital zoom
• 4056*3040 (12 MP) capture resolution
• 120 degrees horizontal field of view
• Automatic people framing
• Hardware accelerated video encode and decode
• Distortion correction
• Noise reduction
• Chromatic aberration correction
• Automatic white balance and color correction
• People video resolution: Up to 1080p / 30
• Content video resolution: 720p / 60, 1080p / 30

Security

• Secure boot
• The Zoom Rooms app is secured with App Lock Code
• Communications are established with 256-bit TLS encryption
• Shared content is encrypted with AES-256 encryption
• The Zoom Rooms app is secured with App Lock Code
• As a native Zoom device Neat Bar supports all Zoom signaling and media encryption protocols.
• Read more about Zoom security.

Electrical and environmental requirements

• Built-in power supply
• 100 - 240 V AC, 50 Hz to 60 Hz
• Ambient operating temperature: 32° to 95° F (0° - 35° C)
• Storage temperature: 5° - 149° F (-15° - 65° C)
• Relative humidity: 20% to 80%

Networking & ports

• WiFi
• AC Power (internal power supply)
• Ethernet
• USB-C for touch input
• 2 × HDMI-out
• HDMI-in for Zoom sharing (1080p)

Size & weight

Width: 21.9 inches (556 mm)
Height: 3 inches (76 mm)
Depth: 3 inches (76 mm)
Weight: 3.75 pounds (1.7 kg)

What's in the box

• Neat Bar
• Neat Pad
• HDMI cable (6.5 feet / 2 meters)
• Ethernet cable (9.8 feet / 3 meters)
• Power cord (9.8 feet / 3 meters)
• Mount adapter, wall mount, screen mount and table stand
• 4 × M6 screw (0.94 inches / 24mm) for VESA mount
• 4 × M8 screw (0.94 inches / 24mm) for VESA mount for two screen setup
• 2 × spacer to secure parallel TV mount

What you need

• Zoom Rooms license
• Display (16:9 aspect ratio) with HD capability or better
• Internet connection

Neat Pad is our dedicated Zoom Rooms controller that doubles as a Scheduling display.

* Supported in future software update

• 8-inch (diagonal) touch screen
• 1280 x 800 screen resolution
• Anti glare, anti smudge coating
• Ambient light sensor
• Sensors for temperature, humidity, CO2 and VOC
• Side LED Indicators
• Speakers for ultrasound
• 2 microphones (*)
• Accelerometer
• Wall mount and side mount
• Kensington lock
• Zoom Rooms software

Security

• Secure boot
• The Zoom Rooms app is secured with App Lock Code

Electrical and environmental requirements

• Power over Ethernet (PoE): 802.3at PoE+ (Class 4/mode A)
• 56 V DC 0.275 A
• Ambient operating temperature: 32° to 95° F (0° - 35° C)
• Storage temperature: 5° - 149° F (-15° - 65° C)
• Relative humidity: 20% to 80%

Networking & ports

• WiFi
• USB-C (reserved for future use)
• Ethernet (supports PoE)
• Power adapter for AC (optional)

Size & weight

• Width: 7.8 inches (198 mm)
• Height: 1.7 inches (42 mm)
• Depth: 5 inches (127 mm)
• Weight: 1.15 pounds (520 g)

What's in the box

• Neat Pad
• 2 × Ethernet cable (9.8 feet / 3 meters + 16.4 feet / 5 meters)
• PoE power adapter
• Mount adapter, side mount and wall mount 
• 4 × M4 screw (0.30 inches / 7.5 mm) for the wall mount
• 3 × M4 screw (0.19 inches / 4.7 mm) for the side mount