ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)

(No reviews yet) Write a Review
SKU:
AD-CG-xx-EF
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)
  • ADECIA Ceiling, Ceiling Microphone, Line Array Speaker, and Audio Processor Solution (Network Switch Not Included)

Description

 

ADECIA Ceiling

A family of products designed to be easily installed and work seamlessly together to provide complete and customizable communications solutions for meeting spaces or classroom audio. The ADECIA ceiling microphone & line array speaker solution helps overcome challenges with implementation, configuration and room acoustics by providing all components required for a successful installation and automatic technologies that reduce set up time, costs and complexities. Watch our ADECIA video series and learn more about our new ceiling mounted microphone!

 

adecia-classroom.jpg.aspx.jpeg  

 

HYBRID CLASSROOM AUDIO 

  • Touchless for added safety protocols 
  • Easily managed remotely by AV/IT departments
  • Lecture capture + Voice-lift
  • Ability to connect to legacy products such as control systems, codecs, speakers
  • Freedom to move throughout classroom without sacrificing audio pickup

 

    

Best audio in shortest time:

  • Auto-detects installed components
  • Auto-configures the devices
  • Auto-optimizes audio performance for room audio environment (reverberation characteristics, echo behavior, speaker/mic position, and more)
 adecia-key-visual-0001-pre.jpg.aspx.jpeg
beamforming-1.png.aspx.png

Dynamic, multi-beam tracking technology:

  • Constant live tracking beams search for voice when the conference room microphone and speaker system are in use
  • Supports lively discussions with multiple participants
  • No fixed lobes = no dead spots
  • Room set up flexibility – no need to preprogram lobes when design changes

Easy install/set up:

  • Three-step guided configuration
  • No need to program fixed beams
  • Components utilize one network cable connection avoiding troublesome wiring
  • Integration into all audio environments: USB, analog I/O, Bluetooth, SIP telephony and Dante
  • Open API for integration with other Yamaha or 3rd-party components
 image-1.png.aspx.png

 ADECIA Ceiling Solution Features

  • Ceiling Array Microphone (RM-CG) NEW!
  • Available in white or black
  • Signal Processor (RM-CR) NEW!
  • NETWORK SWITCH NOT INCLUDED
  • Line-array POE+ powered speakers (VXL-16P)
  • Available in white or black

Specs and Details

RM CG GENERAL
Description
Ceiling Microphone
Color
Black, White
Dimensions (WxDxH)
W560×D560mm×H90mm（including protrusions／microphone panel: H22mm)
Weight
5.6kg
Power requirements
PoE(IEEE 802.3af), DC 48V
Maximum Power Consumption
7.2 W
In Operation
Temperature 0℃～40℃ Humidity 30%～90% (No condensation)
Storage
Temperature -20℃～60℃ Humidity 20%～90% (No condensation)
Indicator
Front Indicator(Mute/Unmute & Status) ・Network Port Indicator
Mount
Ceiling Mount (*can’t replace a grid ceiling panel.) Wire hanging VESA mount
Max device number with RM-CR
２(Connection with other than RM-CR is not limited to this device)
Accessories
Construction description, (Guarantee), grillex1, screws for grille (M3x8mm)x5(*), screw coverx4, cutting template x1, Cringx1, screws for C ring x2, hanger anglex1, screws for hanger angle(M4x20mm)x5(*), terminal coverx1, safety wire x1,binding bandx1, clamp platex2 (*)including a spare respectively
Dust Protection
IP5X for dust protection（with junction cover）
Plenum Rating
UL2043（with junction cover）

RM – CG NETWORK SPECIFICATIONS

Ether1
Dante Audio/Dante Control, Remote Control, WebUI, PoE
Cable requirements
Cat 5e or higher (STP Recommended)

RM – CG AUDIO SPECIFICATIONS

Frequency response
160Hz – 16kHz(-10dB)
Sampling Rate
48kHz
Bit depth
24bit
Latency
58 [ms] (including signal processing)
Audio I/O Dante
1in x 2out 　In1=AEC reference signal／Out1=output of beam mix, Out2= output of beam mix（simple processed）
Maximum input level of SPL（0dB
117.8 dB SPL
Self Noise
-0.8 dBA SPL
SNR(Ref. 94 dB SPL at 1 kHz
94.8 dBA
Sensitivity
-23.8 dBFS/Pa
Dynamic Range
118.6 dBA
Signal Processing
Multi beam tracking, Adaptive Echo Canceler，Noise Reduction, Dereverberation，Auto Mixer, Auto Gain Control，Parametric EQ，Output Gain

RM-CR GENERAL

Description
Signal Processor
Dimensions (WxDxH)
W215mm×D260×H44mm
Weight
1.6kg
Power requirements
PoE+(IEEE 802.3at, LLDP), DC 48V
Maximum Power Consumption
15.0W
In Operation
Temperature 0℃～40℃ / Humidity 30%～90% (No condensation)
Storage
Temperature -20℃～60℃ / Humidity 20%～90% (No condensation)
Indicator
・Power Indicator ・Status Indicator ・Bluetooth Indicator ・Network Port Indicator（x3）
Accessories
Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel
Mount
Table Mount, Rack Mount
Connector
RJ 45, USB, XLR balanced, RCA
Maximum Device with RM-CR
-
Options
RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit

RM-CR NETWORK SPECIFICATIONS

Ether1
Dante Audio/Dante Control, Remote Control, WebUI, PoE+
Ether2/Ether3
Corporate Network, Remote Control, SIP, WebUI
USB Network (Front)
USB2.0, Network Class, WebUI, Fixed IP
Cable requirements
Ether1/2/3 : Cate 5e or higher (STP Recommended) USB Network : USB Cable (A-microB type)

RM-CR AUDIO SPECIFICATIONS

Frequency response
20Hz – 20kHz
Sampling Rate
48kHz
Bit depth
24bit
Latency
8 [ms] (Dante In to USB Out, includes signal processing)
Dante
16in x 16out 
USB
USB2.0, Audio Class 1.0 Input: 2ch, Output: 2ch @48kHz
Mic Input
XLR balanced, Input 2ch
AUX
RCA unbalanced (Line Level), Input: 2ch, Output: 2ch
Speaker Out
RCA unbalanced (Line Level), Output: 2ch
Bluetooth
Version 4.2 Supported profiles: HFP(1.6), A2DP, AVRCP Supported codec: CVSD, SBC, mSBC Wireless output: Class2 Maximum communication distance: 10m (32.8 ft) (no obstacles) Radio frequency (operational frequency): 2,402 to 2,480 MHz Maximum output power (EIRP): 4.0 dBm (2.5 mW)
SIP
Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured) Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user Codecs G.711, G.722HD, G.729ab, G.726 DTMF Support RTP event, SIP in-band, SIP info package Security SRTP Support (RFC 1889), IETF SIP support (RFC 3261 and companion RFCs)
RM-CR INPUT/OUTPUT CHARACTERISTICSInput TerminalMIC IN 1,2 / AUX IN L,RInput LevelNominal -46dBu -14dBu / Max. before clip -26dBu +6dBV / Connector XLR-3-31 (Balanced)/ RCA PINOutput TerminalAUX OUT L,R / SP OUT L,RSource Impedance1kΩFor Use with Nominal10kΩOutput LevelNominal -14dBV / Max. before clip +6dBV / Connector RCA PIN

 

 

 

 

 

 

 

 

View AllClose

Videos Hide Videos Show Videos

Related Products