ADECIA RM Audio Processor

(No reviews yet) Write a Review
SKU:
RM-CR
MPN:
RM-CR
$1,999.00
Frequently bought together:

Description

RM-CR GENERAL

 

Description

Signal Processor

Dimensions (WxDxH)

W215mm×D260×H44mm

Weight

1.6kg

Power requirements

PoE+(IEEE 802.3at, LLDP), DC 48V

Maximum Power Consumption

15.0W

In Operation

Temperature 0℃40℃ / Humidity 30%90% (No condensation)

Storage

Temperature -20℃60℃ / Humidity 20%90% (No condensation)

Indicator

Power Indicator Status Indicator Bluetooth Indicator Network Port Indicatorx3

Accessories

Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel

Mount

Table Mount, Rack Mount

Connector

RJ 45, USB, XLR balanced, RCA

Maximum Device with RM-CR

-

Options

RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit

 

RM-CR AUDIO SPECIFICATIONS

 

Frequency response

20Hz – 20kHz

Sampling Rate

48kHz

Bit depth

24bit

Latency

8 [ms] (Dante In to USB Out, includes signal processing)

Dante

16in x 16out

USB

USB2.0, Audio Class 1.0 Input: 2ch, Output: 2ch @48kHz

Mic Input

XLR balanced, Input 2ch

AUX

RCA unbalanced (Line Level), Input: 2ch, Output: 2ch

Speaker Out

RCA unbalanced (Line Level), Output: 2ch

Bluetooth

Version 4.2 Supported profiles: HFP(1.6), A2DP, AVRCP Supported codec: CVSD, SBC, mSBC Wireless output: Class2 Maximum communication distance: 10m (32.8 ft) (no obstacles) Radio frequency (operational frequency): 2,402 to 2,480 MHz Maximum output power (EIRP): 4.0 dBm (2.5 mW)

SIP

Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured) Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user Codecs G.711, G.722HD, G.729ab, G.726 DTMF Support RTP event, SIP in-band, SIP info package Security SRTP Support (RFC 1889), IETF SIP support (RFC 3261 and companion RFCs)

 

RM-CR NETWORK SPECIFICATIONS

 

Ether1

Dante Audio/Dante Control, Remote Control, WebUI, PoE+

Ether2/Ether3

Corporate Network, Remote Control, SIP, WebUI

USB Network (Front)

USB2.0, Network Class, WebUI, Fixed IP

Cable requirements

Ether1/2/3 : Cate 5e or higher (STP Recommended) USB Network : USB Cable (A-microB type)

 

RM-CR INPUT/OUTPUT CHARACTERISTICS

 

Input Terminal

MIC IN 1,2 / AUX IN L,R

Input Level

Nominal -46dBu -14dBu / Max. before clip -26dBu +6dBV / Connector XLR-3-31 (Balanced)/ RCA PIN

Output Terminal

AUX OUT L,R / SP OUT L,R

Source Impedance

1kΩ

For Use with Nominal

10kΩ

Output Level

Nominal -14dBV / Max. before clip +6dBV / Connector RCA PIN

View AllClose