ADECIA Tabletop Microphone and Network Switch Solution

ADECIA Tabletop

Included within the ADECIA solution family, the ADECIA Tabletop Microphone & Line Array Speaker Solution offering features the same easy setup and auto configuration features available through the RM-CR audio processor. Installation of the wired tabletop microphones is done through a LAN cable to the PoE switch. Up to eight microphone pods (four microphones per pod) can be added for scalability.

The ADECIA tabletop solution, like the ADECIA Ceiling System, integrates the RM-CR remote conference processor, VXL1-16P Dante/PoE-compatible line array speaker, and SWR2311P-10G Yamaha’s long-trusted PoE network switch, providing comfortable and effortless remote conferencing experience.

The innovative technology also allows installers to dictate each microphone pod’s directional mode for customized room capture. Available mic options include:

• unidirectional
• super-cardioid
• hyper-cardioid
• omnidirectional
• bidirectional
• toroidal

Packing into RM-TT’s low-profile form factor is all of Yamaha’s powerful sound technologies, including:

• automatic voice tracking
• auto gain control
• adaptive echo cancellation
• noise reduction
• reverberation suppression

The unique voice tracking function automatically selects the microphone closest to the person speaking for optimal voice capture.

RM-TT GENERAL

Dimensions

140 (W) × 41.5 (H) × 140 (D) mm

Weight

310g

Power Requirements

PoE (IEEE 802.3af)

Maximum Power Consumption

4.5W

Connector

RJ45

In Operation Temp/Humidity

0°C - 40°C / 30% - 90% (no condensation)

Storage Temperature/Humidity

-20°C - 60°C / 20% - 90% (no condensation)

Indicator

Mute indicator (Mute/Unmute), Status indicator, Network port indicator

Max Device Number with RM-CR

8

Accessories

Installation manual, Tabletop mounting adapter, Screw for mounting x 3, Spacer x 3

RM-TT NETWORK

Ethernet

Dante, Remote Control, Web UI, PoE

Cable Requirements

CAT5e or higher (STP)

RM-TT AUDIO SPECIFICATIONS

Audio I/O Dante

1in/2out

Sampling Rate

48kHz

Bit Depth

24bit

Frequency Response

160Hz - 16kHz (-10dB)

Max Input Level of SPL (0dBFS)

106.8dB SPL

Self Noise

6.3dBA SPL

SN Ratio Ref. 94dB SPL at 1kHz

87.7dBA

Sensitivity

-12.8dBFS/Pa

Dynamic Range

100.5dBA

Signal Processing

Auto Voice Tracking, Selectable Polar Pattern (Cardioid, Hyper-cardioid, Super-cardioid, Omnidirectional, Bidirectional, Troid), Adaptive Echo Canceller, Noise Reduction, Dereverberation, Auto Mixer, Auto Gain Control, Parametric EQ, Output Gain

RM-CR GENERAL

Dimensions

215 (W) x 44 (H) x 260 (D) mm

Weight

1.6kg

Power Requirements

PoE+ (IEEE 802.3at, LLDP), DC 48V

Maximum Power Consumption

15.0W

In Operation Temp/Humidity

0°C - 40°C / 30% - 90% (no condensation)

Storage Temperature/Humidity

-20°C - 60°C / 20% - 90% (no condensation)

Indicator

Power indicator, Status indicator, Bluetooth indicator, Network port indicator x 3

Accessories

Installation manual, USB Cable (A-B) 5m (16.4ft), USB Cable (A-microB) 1m (3.3ft), Rubber foot x 4, Access panel

Options

Rack Mount Kit RM-MTL, Table Mount Kit RM-MRK

RM-CR NETWORK

Ether1

Dante, Remote Control, Web UI, PoE+

Ether2/Ether3

Corporate Network, Remote Control, SIP, Web UI

USB Network (Front)

USB2.0, Network Class, Web UI, Fixed IP

Cable Requirements

Ethernet1/2/3: CAT5e or higher (STP) USB Network : USB Cable (A-microB)

RM-CR AUDIO SPECIFICATIONS

Audio I/O Dante

16in/16out

Audio I/O USB

USB2.0, Audio Class 1.0, Input: 2ch, Output: 2ch @48kHz

Audio I/O Microphone Input

XLR Balanced, Input: 2ch

Audio I/O Aux

RCA Unbalanced (Line Level), Input: 2ch, Output: 2ch

Audio I/O Speaker Out

RCA Unbalanced (Line Level), Output: 2ch

Audio I/O Bluetooth

Version 4.2 Supported Profiles: HFP (1.6), A2DP, AVRCP Supported Codec: CVSD, SBC, mSBC Wireless Output: Class2 Maximum Communication Distance: 10m (32.8ft) (no obstacles) Radio Frequency (Operational Frequency): 2,402MHz - 2,480MHz Maximum Output Power (EIRP): 4.0dBm (2.5mW)

Audio I/O SIP

Call Handling: Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Redial, Call timer, Call ID, Voice mail notifications (switch configured) Call Bridging: Supports bridging SIP, USB, BT and AUX calls. Join, Split, Hold, Resume, 5+1 lines: up to 2 SIP calls, 1 USB call, 1 Bluetooth call, 1 AUX, Plus the user Codecs: G.711, G.722HD, G.729ab, G.726 DTMF Support: RTP event, SIP in-band, SIP info package Security: SRTP support (RFC 1889), IETF SIP support (RFC 3261 and companion RFCs)

Sampling Rate

48kHz

Bit Depth

24bit

Latency

8ms (Dante In to USB Out, includes signal processing)

Frequency Response

20Hz - 20kHz

RM-CR ANALOG INPUT CHARACTERISTICS

Input Terminal

MIC IN 1/2 AUX IN L/R

Input Level

Nominal MIC IN 1/2 : -46dBu / AUX IN L/R :-14dBv

Input Level

Max. before Clip MIC IN 1/2: -26dBu / AUX IN L/R: +6dBV

Connector

MIC IN 1/2: XLR-3-31 (Balanced) AUX IN L/R: RCA Pin

RM-CR ANALOG OUTPUT CHARACTERISTICS

Output Terminal

AUX OUT L/R SP OUT L/R

Source Impedance

1kΩ

For Use with Nominal

10kΩ

Output Level

Nominal: -14dVb Max. before Clip: +6dVb

Connector

RCA Pin